Diamond Drill Bit & Tool
Grinder Heads & Bits
Diamond Grinder Bit, Glass Grinder heads, Inland

Go to top of Page

Return to Previous Section

1/4" Grinder Head

3/4" Grinder Head

1" Grinder Head

Diamond Grinder Heads
Fine Grit - Standard Grit - Speed Grit

Inland diamond grinder heads fit all Inland grinders and can be used as replacements on Glastar (except Starlet/G5), Gemstone or other grinders with a 5/16" shaft size.  Available in Standard (140 grit), Fine (200 grit) or Speed (100 grit). 

The standard grit grinder head is used most often and is the type originally included with the grinders from the factory.  The Fine Grit heads provide a much smoother edge, however, they grind much slower - maybe only half as fast.  The Speed Bit heads grind nearly twice as fast as standard heads but because of the courser diamond grit, they leave a somewhat rougher edge.  Other specialty heads are also available below.

--- Item ---	Price	Qty / Order?
Standard Grinder Heads (140 grit):
TL-310  1/4" Standard Grinder Head	17.95
TL-311  3/4" Standard Grinder Head	18.95
TL-312  1"   Standard Grinder Head	22.95
Fine Grit Grinder Heads (200 grit):
TL-343  1/4" Fine Grit Grinder Head	19.95
TL-344  3/4" Fine Grit Grinder Head	22.95
TL-345  1"   Fine Grit Grinder Head	26.95
Speed Grinder Heads (100 grit):
TL-320  1/4" Speed Grinder Head	19.95
TL-321  3/4" Speed Grinder Head	22.95
TL-322  1"   Speed Grinder Head	26.95

Go to top of Page

Return to Previous Section

Lamp Bit

Ripple Bit

Jewelry Bit

Specialty Grinder Heads

The Lamp Bit grinder head has 9 degree and 18 degree angled sides, which allows you to grind the edge of  lamp panels to fit properly.

The Ripple Bit grinder head is used to reduce the thickness of the edge of specialty glass to the standard 1/8" thickness.

A Jewelry Bit has a very thin grinding surface designed for creating a slot in fused glass, stones or jewels for making jewelry.  The bit is designed the create a slot to fit 16 or 18 guage wire.

Inland diamond grinder heads fit all Inland grinders and can be used as replacements on Glastar (except Starlet/G5), Gemstone or other grinders with a 5/16" shaft size.  Regular grinder heads are also available, above.

--- Item ---	Price	Qty / Order?
TL-346  3/4" Lamp Bit Grinder Head	31.95
TL-347  3/4" Ripple Bit Grinder Head	28.95
TL-222  1" Jewelry Grinder Head	47.95

Go to top of Page

Return to Previous Section

5" TwinSpin Disc

Inland 5" Diamond Disc Heads
For Inland Twin Spin Router/Disc Grinders

The 5" diamond disc head is used on the Inland Twin Spin combination router/disc grinder.  The disc head has a 5/16" shaft size and is available in Standard (140 grit), Fine (200 grit), or SuperFine (280 grit).

--- Item ---	Price	Qty / Order?
TL-314  5" Disc for Inland TwinSpin, Std                 (standard grit, 140 grit)                    Sorry - Out of Stock -                                  No Backorders	64.75
TL-328  5" Disc for Inland TwinSpin, Fine                 (fine grit, 200 grit)	67.75
TL-330  5" Disc - Inland TwinSpin, Super Fine                 (super-fine grit, 260 grit)	67.75